Carriage W/Forks - JLG G10-55A Operation & Safety Manual

Section 5 - Attachments

Carriage w/Forks

OY0690
OY2860
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt switch (2) controls fork tilt.
• Press left side of switch to tilt up.
• Press right side of switch to tilt down.
Installation Procedure:
• Refer to "Attachment Installation" on page 5-9.
Operation:
• When utilizing lifting lug, weight of rigging must be included as part of total
load lifted
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
5-16
Use Carriage Attachment Capacity Chart
To determine
Attachment/Fork Capacity" on page 5-4.
Suspend loads in accordance with requirements set forth in
Section 1 - General Safety Practices.
maximum capacity,
1
refer to "Telehandler/
2
31200745