Operator Maintenance Instructions; Fuel System - JLG G10-55A Operation & Safety Manual

Section 7 - Lubrication and Maintenance
7.5

OPERATOR MAINTENANCE INSTRUCTIONS

Fuel System

A. Fuel Level Check
1
1. Check fuel gauge (1) located on instrument panel in cab.
2. If fuel is low, proceed to fuel source and perform "Shut-Down Procedure" on
page 4-4.
3. Turn fuel tank cap (2) and remove from filler neck.
4. Add diesel fuel as needed.
5. Replace and secure fuel tank cap.
Note: Replenish diesel fuel at end of each work shift to minimize condensation.
EQUIPMENT DAMAGE. Do not allow machine to run out of fuel during
operation. See Engine Operation & Maintenance Manual for details prior to
servicing.
7-12
NOTICE
10
OW0970
2
OY2990
31200745
OW0990