Operator Cab - JLG G10-55A Operation & Safety Manual

2.5

OPERATOR CAB

The telehandler is equipped with an open or enclosed ROPS/FOPS cab.
Never operate telehandler unless the overhead guard, cab structure and right
side glass or screen are in good condition. Any modification to this machine must
be approved by JLG to assure compliance with ROPS/FOPS certification for this
cab/machine configuration. If the overhead guard or cab structure is damaged,
the CAB CANNOT BE REPAIRED. It must be REPLACED.
31200745
Section 2 - Pre-Operation and Inspection
WARNING
2-13