Hydraulic Quick Switch - JLG G10-55A Operation & Safety Manual

Hydraulic Quick Switch

This installation procedure is designed for one-person operation.
1. Tilt quick switch back to provide clearance.
2. Align attachment pin with recess in attachment.
Raise boom slightly to engage attachment pin
in recess.
3. Check to be sure lock pin is disengaged. Tilt
quick switch forward to engage attachment.
4. Press and hold quick switch switch (1).
At the same time push auxiliary hydraulic
joystick (2) left to engage lock pin. Push
auxiliary hydraulic joystick right to
disengage lock pin.
31200745
Section 5 - Attachments
OY3610
OY3250
OY3260
OY3270
1
2
5-11