Dual Fork Positioning Carriage
OZ3670
OY2890
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt switch (2) controls fork tilt.
• Press left side of switch to tilt up.
• Press right side of switch to tilt down.
To Fork Position:
The auxiliary hydraulic joystick (3) controls fork position.
• Move joystick left to shift forks in.
• Move joystick right to shift forks out.
Installation Procedure:
• Refer to "Attachment Installation" on page 5-9.
31200745
Use Carriage Load Chart
To
determine
Attachment/Fork Capacity" on page 5-4.
Section 5 - Attachments
maximum
capacity,
1
3
refer
to
"Telehandler/
2
5-23