Personnel Work Platform - Fork Mounted - JLG G10-55A Operation & Safety Manual

Personnel Work Platform - Fork Mounted

OY1610
The operator and personnel in platform must read and understand the
separate personnel work platform manual prior to installing and using a
platform.
OY2960
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt switch (2) controls platform tilt.
• Press left side of switch to tilt up.
• Press right side of switch to tilt down.
Installation Procedure:
• Ensure carriage is properly installed. Refer to "Attachment Installation" on
page 5-9.
• Secure the fork mounted platform to the forks by sliding the fork mounted
platform onto the parent forks and install the retaining pin behind the vertical
shank of the fork.
31200745
Use Appropriate Carriage Attachment Capacity Chart
To determine
Attachment/Fork Capacity" on page 5-4.
Section 5 - Attachments
maximum capacity,
1
refer to "Telehandler/
2
5-39