Advertisement
SureCross DX99 FlexPower Node (Metal Housing)
10. Properly dispose of your used battery according to local regulations by taking it to a hazardous waste collection site, an
e-waste disposal center, or other facility qualified to accept lithium batteries.
Battery Replacement Warnings
WARNING:
•
Do not replace battery when an explosive dust atmosphere may be present.
•
The replacement battery MUST be a Banner approved battery, model number BWA-BATT-001.
Use of a different battery will VOID the intrinsic safety rating of this device and may result in an
explosion!
•
When replacing the battery, the negative end of the battery holder is the side with the spring
terminal. This side is marked with a minus (−) sign.
•
Do not attempt to recharge the battery. These batteries are not rechargeable. Recharging may
cause serious injury to personnel or damage the equipment. Replace only with factory
recommended batteries.
Assembly
Follow these steps to assemble your DX99...D Single Chamber Metal Housing model.
P/N 142497 Rev. L
As with all batteries, these are a fire, explosion, and severe burn hazard. Do not burn or
expose them to high temperatures. Do not recharge, crush, disassemble, or expose the
contents to water.
The battery may be replaced in explosive gas atmospheres. Replacement battery model
number: BWA-BATT-001. For pricing and availability, contact Banner Engineering.
www.bannerengineering.com - Tel: +1-763-544-3164
The DX99 unit ships as a complete unit, including the radio
core, housing, and integrated battery. A small bag
containing a black flexible antenna extension cable and one
terminal header is also included in the shipment.
(For internal antenna models, the flexible antenna
extension cable is not included.)
7
Advertisement
