Allen-Bradley MPAI-A C Series Installation Instructions Manual page 55

12. Apply medium strength thread-locker to the anti-rotate shaft fastener and assemble
through the anti-rotate clamp and into the anti-rotate shaft; torque to the value shown
on the table.
Frame Size
64
83
110
144
13. Torque the two bearing block fasteners as shown in the table.
Frame Size
64
83
110
144
14. Use the procedure in
page 30 to re-establish home.
Rockwell Automation Publication MPAI-IN001F-EN-P - January 2016
Torque
7.8 N•m (5.75 lb•ft)
20.3 N•m (15.0 lb•ft)
Torque
13.2 N•m (9.7 lb•ft)
39.5 N•m (29.13 lb•ft)
56.5 N•m (70.0 lb•ft)
Configure Your Servo Drive with RSLogix 5000 Software on
MP-Series Heavy-duty Electric Cylinders
55