Advertisement
Reducing the Number of Time and
Temperature Settings
To reduce the number of temperature settings available in
a day from six to four, proceed as follows:
Set the 3 and 4 period temperatures to the same
Ÿ
temperature as set on period 2 Periods 1 and 2 will now
operate as normal.
For two settings per day, set the temperature on periods
Ÿ
2, 3, 4 and 5 to the same temperature as set on period 1.
For one setting per day use the Target Temperature Lock
Ÿ
procedure located on page 3 of this user guide.
Battery Replacement
Your SCT007 is battery
operated. The batteries
supplied with the unit
s h o u l d
approximately two years.
When the batteries are nearing the end of their life a
BATTERY LOW symbol will flash on the display (see
diagram above).
Isolate any external electricity supply to your
SCT007 before replacing the batteries
Press the RELEASE BUTTON on the right hand side of the
unit and swing the front cover away from the mounting
plate by gently pulling on the right.
Remove the old batteries (with the batteries removed your
SCT007 will retain its programme for approximately five
minutes) and replace them with three new AA size alkaline
batteries, ensure they are fitted correctly as shown on the
label positioned between the battery terminals (see
diagram on page 7).
Once batteries have been fitted, offer the left hand side of
the unit up to the mounting plate ensuring that the two
guide lugs are fitted into the corresponding slots in the side
of the mounting plate.
Now swing the right hand side of the SCT007 up against
the mounting plate until the release button clicks into
place. After a few seconds the display will automatically
return to your SCT007.
PLEASE NOTE:
If the battery fitting time has exceeded five minutes some
time and temperature adjustment may be necessary,
please refer to the relevant sections located on page 4 and
5 of this user guide.
l a s t
f o r
6
Advertisement
