Advertisement
Changing the Times and Target Temperatures
Press the SET button
until the SET indicator
is next to PROG
position
The target temperature
setting for the 1st period
will now flash. Use the
+ and - buttons to alter
the target temperature if
required
Press
Enter
The copy indicator will now illuminate, this will allow the
complete programme to be duplicated into any or all of the
remaining days: Go to B to continue or go to C to finish If
the copy feature is not required press ENTER and go to
A to programme the remaining days or go to C to finish
Use the PLUS
button to select a
day to copy the
programme to
A
The day setting indicator
will now flash. Use the +
and - buttons to alter the
day to be programmed
Press
Enter
Repeat for remaining
5 time and temperature
periods
B
Press
Enter
C
Press the SET button
until the SET indicator
is returned to the RUN
position
The time setting for the
1st period will now flash.
Use the + and - buttons
to alter the start time if
required
Repeat for all days that require
this programme. The day
indicator will remain
illuminated for days which
have already been copied to
To programme the remaining
days if alteration to preset
times are required, press
ENTER and go to A or go to C
to finish
Press
Enter
Press
Enter
5
Advertisement
