Advertisement
Target Temperature Override
Ensure the SET
indicator is in
the normal
RUN position
Where an override temperature has been set, this altered
setting will remain until the next time and temperature
setting is reached.
Target Temperature Lock
The temperature lock facility allows you to 'lock in' the
target or override temperature of the current heating
period.
With the SET indicator in the RUN position press the
ENTER button. The temperature lock symbol will appear
on the right hand side of the display. All control buttons
other than the ENTER button will be inoperative.
The locked temperature will now override all other
temperature settings until the lock is cancelled.
To cancel the temperature lock, and return to normal
settings, simply press the ENTER button.
I f a n o v e r r i d e
temperature had
been set before the
lock was activated,
the altered setting
will remain until the
lock is de-activated.
Setting the Time of Day
Press the
SET
Use
button
the
until SET
+ and -
indicator
buttons
is next to
to
clock
adjust
position
the
on the
day
display
When setting the time or altering the temperature settings,
if a period exceeding 65 seconds is allowed to elapse
between button presses then the SCT007 will
automatically return to the run position. Any alterations
made since the last press of the ENTER button will not be
recognised.
Mannual Overrides
Use the + and -
buttons to
increase or
decrease settings
Press
Enter
Use
the
+ and -
buttons
Press
to
Enter
adjust
the
time
The SCT007 will
operate on this
new setting until
the next time
period
Press the
SET
button
until SET
indicator
is
returned
to the
RUN
position
3
Advertisement
