Wristband Wiring Connections; Connecting The Digits To The Wristband - Össur i-digits Component Assembly Manual

4.4 3

Wristband Wiring Connections

Remove the bellows by pulling them over the socket end of
the assembly, as shown, to expose the PCB (fig. 32).
Take care not to damage the PCB.
Slide the protective PCB cover out of the bellows assembly
(fig. 33).
4.3 4

Connecting the Digits to the Wristband

Fig. 34:
Little Middle Ring Index
Fig. 32:
Fig. 33:
Thumb
16 of 25