Page 2
This symbol signifies important information and is used throughout the manual. Refer to www.touchbionics.com/downloads/document-library to ensure you have the latest copy of this document. For further training information and videos demonstrating use of i-digits devices in a variety of functional activities visit http://training.touchbionics.com/user-en.html. Download the my i-limb app from the Apple App store.
• Smaller ing your i-digits™ device.It takes time and practice to gain - form fitting design decreases device size in every control and master the best way to perform tasks with your dimension prosthetic device.
Depending on how your clinician has set up your prosthesis for you. app control: i-digits™ can access a grip at the touch of an icon on the my i- limb™ app, enabling all automated grips to be available. These are called quick grips™.
Control and Batteries Fig. 3: Prosthesis overview Motorized Digit Knuckle Wristband and batteries Palmer view Dorsal view This illustration above depicts an i-digits™ for users with sound thumb and 4 i-digits™. 7 of 20...
Controlling your prosthesis To fit i-digits™ a socket interface has been specially cre- ated by your prosthetist team. They will have made this to ensure it is comfortable and fits directly to your residual hand.
Battery Charging Fig. 6: batteries i-digits™ is powered by two, 800mAh, 3.7 Volt batteries which have been specifically designed to meet the power requirements of i-digits™ devices. Four batteries are pro- vided, two for the wristband and two spares. Two 3.7 V bat- teries will be needed with the wristband (the wristband will not work with only one battery).
Page 10
Only Touch Bionics batteries are approved for use with i-digits™, use of alternative bat- teries will invalidate the warranty. Charging time from full discharge is approximately 2 hours. Fig. 10: charger base unit i-limb Power Pack batteries for i-digits™...
Covers will be provided for i-digits™ device. Digit covers will be ready to fit and are designed to cover each digit. Touch Bionics’ approved digit covers must be used with each digit of the device.
Grip Review i-digits™ quantum has 20 different grip options available and 12 customizable my grips™ (not shown). All other i-digits™ devices have 12 grip options available. The grips can be accessed and programmed through the software package called my i-limb™ app. The available grips for your device are displayed on the quick grips page of the my i-limb™ app.
Page 13
ADDITIONAL GRIP AND GESTURE OPTIONS Thumb Park Continuous Thumb Park Quick all four fingers remain open and switch all four fingers remain open and switch off, only the thumb will move. off, for 1.5 seconds the thumb will close and then automatically return to an open position.
Support Information Storage and Maintenance Always turn off your i-digits™ device when not in use. Aim to charge the battery each day after use. Replace the batteries every 12 months. Ensure your i-digits™ is serviced every 12 months. 14 of 20...
Contact your Prosthetist action Prosthesis opens when a close Contact your Prosthetist signal is provided Battery is not working Check the battery is connected Check the battery is charged Check the device using one of the spare i-digits™ batteries 15 of 20...
Only approved Touch Bionics accessories and tooling may the warranty. be used with i-digits™. Do not use an i-digits™ device to operate your mobile device whilst it is connected to a mains outlet, as this can affect EMG signal. Failure to comply with the above guidelines will invalidate the warranty.
User Information User Details Provision of the following information will enable easy identification of your device, should it be returned to customer service. Please forward to Touch Bionics as per the contact information on the back page of this manual. User Name: ................................
Time from full open to full close 0.8 seconds Environmental Conditions Hazardous Area Classification i-digits™ device is not intended for use outside the boundaries of the environments listed below. The user of i-digits™ device should assure that it is not used in such environments. Condition Level Maximum temperature +70˚c...
Page 19
1 mm. No special protection against penetration by water Serial Number For i-digits™ devices: The unique serial number for i-digits™ device is 2 letters followed by 6 digits, alpha / numeric number. WEEE Compliance: This marking on the product, packaging, accesso-...
Need help?
Do you have a question about the i-digits and is the answer not in the manual?
Questions and answers