Warnings And Safety Precautions - Sartorius PMA.Qualit Series Installation Instructions Manual

Warnings and Safety Precautions

This scale meets the guidelines and
standards governing electronic equipment,
electromagnetic compatibility and the
stipulated safety standards. Improper use
or handling can result in property damage
and/or personal injury. To prevent damage
to the equipment, read these operating
instructions thoroughly before using your
scale. Keep these instructions in a safe
place.
– Do not expose the scale to extreme
temperatures, aggressive chemical vapors,
moisture, shocks or vibrations.
– The displayed values can be affected
when subjected to extreme electromag-
netic influence. When the negative influ-
ence has subsided, the scale will again be
fully operational.
– The equipment must be used indoors
only.
– The scale may not be operated in haz-
ardous /EX Zone areas.
– To ensure safety, disconnect the equip-
ment from power before connecting or
disconnecting the cables or electronic
peripheral devices.
– If you use cables purchased from another
manufacturer, check the pin assignments
in the cable against those specified by
Sartorius before connecting the cable
to Sartorius equipment, and disconnect
any wires that are assigned differently.
The operator shall be solely responsible
for any damage or injuries that occur
when using cables not supplied by
Sartorius.
4
– When connecting the scale to the power
supply, the laws valid in your country
must be observed. If you should have any
questions, please contact your supplier or
Sartorius Customer Service for informa-
tion on the legal regulations applicable in
your country. The scale must be installed
by a certified technician to avoid forfei-
ture of all claims under the manufacturer's
warranty.
– If you see any indication that the scale
cannot be operated safely (for example,
due to damage), turn it off and lock it in
a secure place or otherwise prevent use of
the equipment for the time being. Adhere
to the accident prevention regulations
and inform the operators accordingly.
–
Always make sure the equipment
is disconnected from AC power before
performing any installation, cleaning,
maintenance or repair work on the scale.
To avoid forfeiture of all claims under the
manufacturer's warranty, all repair and
maintenance work must be performed by
authorized Sartorius service technicians.
– All other cables connecting the weighing
equipment and peripheral devices, as well
as the wiring inside the devices, are cased
in PVC materials. Chemicals that corrode
these materials must be kept away from
these cables.
– Never use a hammer to close the lid of a
paint can while it is still on the weighing
pan. Otherwise, you will damage the
weighing system.