Sartorius PMA.Qualit Series Installation Instructions Manual page 17

Setting "TEXTS" in the Display, "LONG" or "SHORT"
Either short or long display prompts for operator guidance can be shown.
Level 1 Level 2
SETUP
EXTRAS
Resetting the Scale: "RESET"
If necessary, you can reset the scale to factory settings.
Note:
If a password was activated, the correct password must first be entered.
Level 1 Level 2
SETUP
RESET
Setting Codes
Under the setting "CODES," the menu items are displayed in code 1.1.1.1.
Level 1 Level 2
LANGUAGE
GERMAN
etc.
o CODES
Note:
To obtain a detailed list of the menu codes, please ask your nearest Sartorius office.
Level 3 Level 4
TEXTS
LONG
o SHORT
Level 3 Level 4
MENU
YES
o NO
Level 3 Level 4
§ Press the L key [ENTER]
§ Press the RS keys to select "EXTRAS"
§ Press the L key [ENTER]
§ Press the RS keys to select "TEXTS"
§ Press the L key [ENTER]
§ Press the RS keys to select "SHORT,"
confirm by pressing the L key.
§ Press the c key (Clear) several times
to exit the menu
§ Press the L key [ENTER]
§ Press the RS keys to select "RESET"
§ Press the L key [ENTER]
§ Press the RS keys to select "MENU"
§ Press the L key [ENTER]
§ Use the RS keys to select "YES"
§ Press the L key [ENTER]; "o" will appear:
the new code is set
§ Press the c key (Clear) several times
to exit the menu
§ Press the R key to select "LANGUAGE"
§ Press the L key [ENTER]
§ Press the RS keys to select "CODES"
§ Press the L key [ENTER]; "o" will appear:
the new code is set
§ Press the c key (Clear) several times
to exit the menu.
17