Chapter 5. Using the front panel display on the SAN Volume
Controller
This chapter provides information about how to use the front panel display which
includes:
v Status indicators
v Menu selections
Related topics:
v "Status indicators"
v "SAN Volume Controller menu options" on page 40
Status indicators
Status indicators are shown on the front panel for the following processes:
v Boot progress
v Boot failed
v Hardware boot
v Node rescue request
v Power failure
v Powering off
v Restarting
v Shutting down
v Error codes
Related topics:
v "Boot failed" on page 38
v "Hardware boot" on page 38
v "Node rescue request" on page 38
v "Power failure" on page 38
v "Powering off" on page 39
v "Restarting" on page 39
v "Shutting down" on page 39
Boot progress indicator
Figure 38 shows that the node is starting.
Figure 38. Boot progress display
During the boot operation, boot progress codes are displayed and the progress bar
moves to the right while the boot operation proceeds.
© Copyright IBM Corp. 2003, 2004
B o o t i n g
1 3 0
37