Operations Under Vpe - Nuvoton ISD-DEMO15100 User Manual

- Install a jumper at bottom position to connect the bottom two pins  ISD15100 device
clock can be from external crystal.
Please note: the silk label on board for J14 XTAL "XTALIN" and "Ext_Res" should switch the
position on Rev-A board. Please bear this mind to avoid confusion.
Figure 9 – Clock source selection
J14: for the purpose of unlocking device; please refer to the appendix for the usage of this jumper.

Operations under VPE

•
Connect a ISD15100 demo board to USB dongle
•
Plug in USB dongle into a PC USB port
•
Launch ISD-VPE15100.
ISD-DEMO15100/15C00/3900
Publication Release Date: Feb 08, 2011
- 11 -
REV_A
Revision 0.1