Related Manuals for Nuvoton ISP-ICP
Summary of Contents for Nuvoton ISP-ICP
- Page 1 ISP-ICP Gang Programmer Nuvoton ISP-ICP Gang Programmer User Manual Revision 5.00, 2010/08/13 By Vincent Y. C. Yu ©2010 Nuvoton Technology Corporation. All Rights Reserved. < Revision 5.00 >...
-
Page 2: Table Of Contents
3.3 Operation Examples........................7 Example1- W78E054D (Using ISP Gang Programmer) .................7 Example2- W79E825A (Using ICP Gang Programmer) .................8 Example3- NUC140VE3AN (Using ICP Gang Programmer)................9 3.4 Check the Programmer Information .....................10 ©2010 Nuvoton Technology Corporation. All Rights Reserved. < Revision 5.00 >... -
Page 3: Revision History
ISP-ICP Gang Programmer Revision History Revision Description Date v4.00 The first formal released version for the ‘ISP-ICP Gang Programmer’. 2010/04/01 v4.01 Nothing is changed but document version number. 2010/04/30 (1) Add ICP mass-programming support to NuMicro-series products. v5.00 (2) Update the PC-site AP to v5.00. (The GUI display for "CONFIG Setting" becomes 2010/08/13 more user-friendly.) -
Page 4: Introduction
ISP-ICP Gang Programmer 1 Introduction The Nuvoton proprietary “ISP-ICP Gang Programmer” provides four-chip mass-programming function. It is specially designed for mass-production in the customer site. After on-line downloading the programming data into the Gang Programmer, the user may start the off-line mass-programming operation. -
Page 5: Driver And Application Program
The setup file for the application program is included in the folder [(2) PC-site AP]. Using the default installation setting, you will find the item “Nuvoton Tools \ Nuvoton ISP-ICP Programmer” appearing in the Windows START- menu after the application program is successfully installed. -
Page 6: Start To Use The Gang Programmer
ISP Programmer except you cannot directly update the MCU chips. You can press the AUTO-key to start programming operation after finishing ‘Download Programmer’. Note the MCU chips should have the ‘Nuvoton standard ISP code’ pre-programmed in LDROM and the CONFIG bits properly configured before they can be programmed by the ISP Gang Programmer. -
Page 7: Operation Examples
Step4: Download the buffer’s data into the non-volatile storage of the Gang Programmer. Step5: Now, you can press the AUTO-key to start the ISP mass-programming in either on-line mode or off-line mode. Step3 Step2 Step4 Step1 ©2010 Nuvoton Technology Corporation. All Rights Reserved. < Revision 5.00 >... -
Page 8: Example2- W79E825A (Using Icp Gang Programmer)
Step5: Download the buffers’ data and CONFIG setting into the non-volatile storage of the Gang Programmer. Step6: Now, you can press the AUTO-key to start the ICP mass-programming in either on-line mode or off-line mode. Step3 Step2 Step5 Step1 Step4 ©2010 Nuvoton Technology Corporation. All Rights Reserved. < Revision 5.00 >... -
Page 9: Example3- Nuc140Ve3An (Using Icp Gang Programmer)
Step5: Download the buffers’ data and CONFIG setting into the non-volatile storage of the Gang Programmer. Step6: Now, you can press the AUTO-key to start the ICP mass-programming in either on-line mode or off-line mode. Step2 Step3 Step5 Step1 Step4 ©2010 Nuvoton Technology Corporation. All Rights Reserved. < Revision 5.00 >... -
Page 10: Check The Programmer Information
To check the programming data downloaded in the Gang Programmer, activate ‘Gang’ mode and then click the ‘Programmer Information’ button when the Gang Programmer is connected to PC. Step1 Step2 ©2010 Nuvoton Technology Corporation. All Rights Reserved. < Revision 5.00 >...