Page 2
The information described in this document is the exclusive intellectual property of Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton. Nuvoton is providing this document only for reference purposes of ISD ChipCorder microcontroller based system design. Nuvoton assumes no responsibility for errors or omissions.
Page 3
ICP tool provided by Nuvoton to burn the ISD93xx configuration bytes, in-system application ROM, in-system data flash, and the external SPI flash on the ISD93xx demo board.
Page 5
ISD93xx Evaluation Board User Manual Jumper setting and button operation are described below: Part Number Description Default Soldering pad for RGB LED blue color Not soldered Soldering pad for RGB LED red color Not soldered Soldering pad for RGB LED green color Not soldered Soldering pad for power indicator red LED Not soldered Nu_Link dongle connector...
Page 6
ISD93xx Evaluation Board User Manual 3 Demo Code The ISD9300 series evaluation board comes with demo functions ready, which means the ISD93xx device on board are shipped with default demo code burned. Once the ISD93xx Touch Board and power supply are connected – see below for the complete demo system, the system is ready to demo the following functions: ...
Nuvoton products could result or lead to a situation where personal injury, death or severe property or environmental damage could occur. Nuvoton customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Nuvoton for any damages resulting from such improper use or sales.
Need help?
Do you have a question about the ISD93 Series and is the answer not in the manual?
Questions and answers