Chapter13 Error Information; Error Code List - ITech IT6800B Series Programming Manual

Error Code List

Error
code
110
120
130
140
150
160
165
170
180
191
-200
-310
-350
-410
-430
0
2

Chapter13 Error Information

Error information
"No input command"
"Parameter
overflowed"
"Wrong units for
parameter"
"Wrong type of
parameter"
"Wrong number of
parameter"
"Unmatched
quotation mark"
"Unmatched bracket"
"Invalid command"
"No entry in list"
"Too many char"
"Execution error"
"System error"
"Too many errors"
"Query
INTERRUPTED"
"Query
DEADLOCKED"
"No error"
"Mainframe
Initialization Lost"
Copyright © Itech Electronic Co., Ltd.
Example
Send empty command.
The setting value exceeds the range. For
example, CURRent 100.0
For example, CURRent 5.0V, the unit is
wrong.
For example, OUTPut:TIMer 100001.0.
For example, CURRent 5.0,6.
For example, CALibrate:SECure 0,"6831'.
For example, CURRent (5.
The command is invalid or the format is
wrong, including the spelling problems.
For example, CUR 5.0.
The command needs three parameters
while the program only processes two
commands practically.
The sending data length is over 256 while
using serial port or USB.
The command execution is invalid due to
wrong command status or wrong setting.
For example, sending *TRG command
must be under the BUS trigger method.
If the trigger method is MANUAL, *TRG
command is invalid.
Undetermined error code.
Too much error in the stack.
While using USB communication, no
parameters is returned after sending
query command, the instrument will
prompt an error.
parameter setting command need to be
followed by a query command i.e. you
need to send the query command after
sending this setting command, if you
send another setting command after
sending this setting
instrument will prompt an error.
While using USB communication, if you
send query command when the query
region is full, the instrument will prompt
an error.
No error.
During the start-up program initialization,
if the instrument can't read the user
setting parameters
EEPROM, the system will prompt an
Error Information
Some status or
command, the
and data from
42