Plumbing Connections; Cold Water Fill; Hot Water Flush - Champion TRISYS SSG M3 Installation, Operation, And Cleaning

Installation

Plumbing Connections

Connections must comply with local safety, sanitary, and plumbing codes.
CAUTION:
supply line before connecting it to the machine.

Cold Water Fill:

Connect a 3/4" FNPT cold water supply to the waterpress tank fill line.
The minimum incoming temperature is 36ºF/2ºC
Install a shut-off valve as close to the connection as possible for servicing.

Hot Water Flush:

Connect a 1/2" FNPT hot water supply to the waterpress flushing supply line.
The incoming min/max water temperature is 110ºF/33ºC - 140ºF/60ºC. Install a shut-off valve
as close to the connection as possible for servicing.
1/2" NPT
Hot Water
Fill
6
The installing plumber must thoroughly flush debris from the water
1/2" NPT
2" NPT
to Drain
to Drain
Fig. 7
3/4" NPT
Cold Water
Fill