Silver Saver Grabber Mangnet (Factory Supllied); Hardware Kit (Factory Supplied); Special Tools (Supplied By Others); Control Cabinet And Start/Stop Station - Champion TRISYS SSG M3 Installation, Operation, And Cleaning

Silver Saver Grabber Magnet (Factory Supplied)
Permanent magnets are standard equipment to prevent silverware and other ferrous metals
from entering the grinder unit. The magnets are usually shipped to the trough fabricator for
installation.

Hardware Kit (Factory Supplied)

The trough adapter gasket, fasteners, and conduit fittings are packaged and placed inside
the trough adapter.

Special Tools (Supplied by Others)

The following special tools are needed for the installation.
(1) 3/8" electric drill, (1) 1-3/8" hole saw for 1" conduit, (1) 7/8" hole saw for 1/2" conduit.

Control Cabinet and Start/Stop Station

The main control cabinet is wall-mounted and installed by others. The cabinet is
equipped with a 20 feet whip from the control cabinet to the grinder junction box and
a 12 foot whip from the grinder junction box to the start/stop station. Longer whips
and wire connections are supplied by others.
Fig. 5
Emergency Stop
Push Button Switch
HMI
Fig. 6
Start/Stop Station
Installation Installation
5