Components
Receiving
Inspect the machine for damage. If damaged, save the packing material and immediately
report damage to a supervisor. The system may have shipped on more than one pallet. Check
the shipping container for parts and accessories that shipped with the machine.
Placement
•
The SSG may have shipped on multiple pallets. Remove the unit(s) from the pallet(s) and
move to their permanent location.
•
Place the grinder and waterpress no less that 2 feet apart.
•
Adjust the height and level of the machines using the adjustable legs. Level the
components from side-to-side and front-to-back.
CAUTION:
Use care when moving the machine components to
prevent damage. Damage due to improper moving
is not covered by the limited warranty.
Water Press
Close-coupled system shown.
Fig. 2 -
Installation
LEVEL ADJUSTMENT
Grinder
3