Installation; Installation Codes; Safety Symbols - Champion TRISYS SSG M3 Installation, Operation, And Cleaning

Waste systems, slow speed grinder and waterpress, close-coupled and remote
Table of Contents

Advertisement

Installation Codes

The installation of the SSG must comply with all local electrical, plumbing, health and safety
codes or in the absence of local codes, installed in accordance with the applicable require-
ments in the National Electrical Code, NFPA 70, Canadian Electrical Code (CEC), Part 1, CSA
C22.1.
NOTE:
Only qualified personnel familiar with the installation of food service equipment should
attempt the installation of this machine. Damage or problems associated with improper
installation will not be covered by the dishwasher limited warranty.

Safety Symbols

The following symbols are used throughout this manual to alert the reader to important
information.
WARNING:
Warning statements indicate a condition or practice that can result in personal
injury or possible death.
DANGER
DO NOT OPERATE
WITHOUT GUARDS
IN PLACE
P/N 116135
CAUTION:
Caution statements indicate a condition or practice that can result in damage
to the machine or associated equipment.
NOTE:
Note statements highlight important information necessary for the operation
of the machine.
DANGER:
THE GRINDER CONTAINS ROTATING CUTTERS.
DO NOT OPERATE WITHOUT GUARDS IN PLACE.

Installation

1

Advertisement

Table of Contents
loading

Table of Contents