Recirculating Pump Trough Connections - Champion P5-24 Installation/Operation Manual With Service Replacement Parts

Recirculating Pump Trough Connection Kit: P/N 407365
P-5 Recirculating Pump Trough Connection Kit: P/N 407365
A trough connection kit (See No. 1 below) is shipped with each pulper equipped with a recirculating pump.
The kit is designed to connect the recirculating pump discharge to a waste trough (supplied by others).
Trunk Option A and Trunk Option B (See No. 2 below) are two suggested methods of making the trunk
connection to the trough which is supplied by others.
1
2
3
4
5
Recirculating Pump Trough Connection Kit: P/N 407365
Trough (supplied by others)
Trunk Option A
Suggested Trough Baffle
(supplied by others)
8
1
8
7
7
6
2
Trunk Option B
1½" Pipe
(supplied by others)
½" Critical Gap
Recirculating Pump Trough Connection Kit P/N 407365
Item No. Part No.
1 102448 Elbow, 1" x 90° Brass
2 100585 Locknut, 1" NPT Brass
3 111557 Nipple RTOE 1" x 2-12" Brass
4 111079 Tee, Red. 1-1/2" x 1-1/2" x 1" Brass
5 111080 Plug 1-1/2" Brass
6 204731 Stub End, Recirc Pump
7 107340 Clamp, Hose SST w/CS Screw
8 111117 Hose, 1-5/8" I.D.
9 104889 Compound, Grey Sealing
Slurry Water
Recirculating
Pump
!! ATTENTION !!
A splash baffle (supplied by others) must be
fabricated and installed in the discharge end of
3
the trough to create the proper water flow. See
No. 3 at left for a suggested design for the baffle.
The splash baffle must extend across the entire
length of the trough and maintain a 1/2" gap
between the baffle and the trough bottom.
The trough must be removable for cleaning.
Description Qty.
1
1
1
1
1
1
2
1
1 ft.
Form # 900822
Form # 900822