Table Of Contents - Rcom MARU DELUXE Hatcher & Brooder MX-100HBD User Manual

Contents
How to use Rcom MARU DELUXE Hatcher & Brooder 100 / 380
1. Introduction
(1) Rcom MARU H&B Introduction
(2) Safety precautions
(3) Identification of Parts and Composition
(4) Name & Function of Operation Parts
2. Before use
(1) What is an Incubation Room?
(2) How to install this MARU H&B
3. Hatching and Brooding
(1) Preparing for Hatching and Brooding / How to Start Hatching and Brooding
(2) Humidification, and how to Terminate Hatching and Brooding
(3) Humidity and Condensation principles, Air Flow considerations, and Post-Hatch maintenance, Dew Condensation
4. MARU H&B Function Settings
(1) Return to Factory Settings
(2) Temperature and Humidity Settings
(3) The Abnormal High and Low Alarm Settings
(4) How to change between Centigrade and Fahrenheit Temperature units
(5) Sound ON /OFF
(6) Room Light ON/OFF Setting
5. How to Clean
(1) Instructions for Disassembling and Cleaning
6. Product Information
(1) How to Service your Maru H&B Replacing the Fuse, General maintenance
(2) Troubleshooting(FAQ)
(3) Specification
Successful hatching depends on many numbers of factors. Neither Autoelex (Rcom) nor its global
distributors and vendors can be held responsible for loss of life or property damage caused by user
neglect, alteration, modification or painting, change of use or power failure. To avoid errors, mishaps
and danger, carefully check this User Manual before initial use. Also please check the manual regularly
to ensure your operation of the machine is correct.
Caution : Caution mark against a fault that can cause damage, trouble, or failure of incubation.
Tip : References or useful suggestions in using Rcom product
Warning of actions which may be dangerous or cause damage to the incubator.
2
* Read the manual completely before use.
Mark Explanation
Prohibited.
Do not disassemble.
Do not touch.
3 ~ 6
7 ~ 8
Hatching and
9 ~ 12
13 ~ 15
Function Settings
How to Clean
16 ~ 17
18 ~ 21
Product Information
It is necessary to keep.
Remove the power cord from outlet.
Ground Connection for preventing electric shock.
DIGITAL INCUBATOR
Introduction
Before use
Brooding