Rcom MARU DELUXE Hatcher & Brooder MX-100HBD User Manual page 9

▶ For the first two seconds, after power on, FND blinks and
the pump starts working (until the internal humidification
water tank is filled : In case of water shortage the pump
runs for 2min.) and for another one second, the version
number will be displayed on FND.
▶ After version indication, buzzer sounds for about 15sec.
At the same time, present temp. & humidity is displayed
and power failure alarm indication ( " . " ) ⓐ is blinking.
▶ Press Jog dial in to remove buzzer and alarm indication.
(Buzzer will cease automatically after 15sec.)
※ Power Outage notification: If power fails during operation or the power cord is reconnected after being removed
for some reason ⓐ ( " . " ) will blink.
Quick Start : If you just connect the power plug and turn power on, the machine automatically starts hatching
and brooding with factory setting. [Factory setting: Temperature 37.0
▶ Current temperature and humidity will appear on the display panel and it will slowly reach the set value after
1~2 hours.
※ The artificial intelligence system memorizes and classifies ambient conditions to assist in keeping optimum
temperature; temperature can move up slowly at first stage.
How to Start Hatching and Brooding
Test the machine to be sure that the machine works
without any problem before placing eggs in the machine.
Please ensure you remember how to use the machine
and maybe re-read instructions.
▶ Eggs in the "last stage of hatching" should be taken from
the incubator (or setter) and put on the H&B cabinet shelves.
If there is an extra universal egg basket, it could be used
as a cover, as shown in the picture.
▶ Put the eggs in the universal egg basket, and basket
supports into the four corners, turn an empty universal tray
upside down, plug into the basket supports to cover the
tray that contains your eggs.
▶ Insert the assembled universal trays into each of the shelves.
Be sure to close the door completely,
if not, the temperature and humidity will not be controlled.
Please check if the machine's floor is wet or not, it
should be dry, otherwise the machine may not reach
the normal temperature.
(Do not place water container on top of the machine.)
DIGITAL INCUBATOR
3. Hatcing and Brooding
3. 부화
(1) Preparing for Hatching and Brooding /
How to Start Hatching and Brooding
(98.6 ), Humidity RH 60%]
℃ ℉
Universal Egg Basket
* MX-380HBD model image
Basket
Support
9