Touch Module Assembly; Figure 4-16-1 Disconnect Tpb-Tp Cable - Toshiba Satellite L830 Maintenance Manual

Replacement Procedures
4.16 Touch Pad Module Assembly
Remove the Touch Pad Module Assembly
The following describes the procedure for removing a touch pad module assembly. (See
Figure 4-16-1 ~ Figure 4-16-4)
1. Disconnect the TPB-TP FFC cable on the TP side.
2. Disconnect the TPB-MB FFC cable on the MB side.
3. Release the following screws securing the TP button module.
• M2.0×2.5-I (BNI)(NYLOK) D7 T0.3 IRON Screw
M2.0×2.5 Screw 3PCS
Satellite L830 Maintenance Manual (960-Q08)

Figure 4-16-1 Disconnect TPB-TP cable

x3
TPB-TP FFC cable
47