Figure 4-14-4 Set The Module On Top Assembly; Figure 4-14-5 Install The Power Button - Toshiba Satellite L830 Maintenance Manual

Replacement Procedures
Install the Power Button Module
The following describes the procedure for installing a Power Button Module. (See Figure 4-
14-4 ~ Figure 4-14-5)
1. Set the module on Top assembly slantwise.
2. Secure the module with follow screw.
3. Make sure the guide pin (on Top assembly) insert into guide hole (on module board)
properly.
4. Connect the Power-MB FFC cable on the system board side.
Satellite L830 Maintenance Manual (960-Q08)

Figure 4-14-4 Set the module on Top assembly

• M2.0×3.0-I (BKAG)(NYLOK) Screw

Figure 4-14-5 Install the power button

x1
M2.0×3.0 Screw
Guiding structure
44