Figure A-30. Power Terminal Locations - Pdu With Left 225A F Frame Subfeed Breakers And A Right Output Distribution Panel - Eaton Powerware 225 kVA Three-Phase Power Distribution Unit Installation And Operation Manual

INSTALLATION REFERENCE
AC Output
(A, B, C)
(See Figure A-36 for details.)
225A F" Frame
Subfeed Breakers
Output Ground Terminals
Neutral Bonding Terminal
Input Ground Terminals
Isolated Ground Terminals
(optional)
NOTE The PDU is shown with four subfeed breakers and a distribution panel. However, the installed
configuration may contain one to four subfeed breakers with or without a distribution panel.
Figure A-30. Power Terminal Locations – PDU with Left 225A F Frame Subfeed Breakers and a Right Output Distribution Panel
A−44
EATON Powerware
®
225 kVA PDU Installation and Operation Manual
S
164201629 Rev D www.powerware.com
Distribution Panel Input Breaker
225A Distribution Panel
(Use Cutler-Hammer bolt-on type
BAB or QBHW breakers, or plug-on
type HQP or QPHW breakers.)
CT Strips (optional)
AC Input
(A, B, C)
(See Figure A-35 for details.)
Lightning Arrestor (optional)
TVSS (optional)
Output Neutral Terminals