PCAN-LIN – User Manual
3
Software Installation
The scope of supply contains the PCAN-LIN Configuration Tool for
Windows and the program Flash Magic that is needed for transfer
of a new firmware to the PCAN-LIN module. The setup program
installs both programs consecutively.
To start the setup procedure of the software, do the following:
1. Insert the supplied DVD into a drive and start the navigation
program Intro.exe.
2. In the category Tools of the navigation program, you'll find
the entry PCAN-LIN Configuration Tool. Click on Install in
order to start the setup program. If requested, grant
administrator privileges.
3. Follow the instructions of the setup program.
After the software setup you can access the PCAN-LIN Configura-
tion Tool via Windows' Start menu. You can find further information
about the use of the PCAN-LIN Configuration Tool in the help which
you can invoke in the program.
11