Installation; Install Software And Driver; Connection - Peak PLIN-USB User Manual

2

Installation

This chapter covers the software setup for the LIN interface PLIN-USB under
Windows and the connection of the LIN interface to the computer.
Install the device drivers package before you connect the LIN interface.

2.1 Install Software and Driver

1. Download the device drivers package from our website:
www.peak-system.com/quick/DL-Driver-E.
2. Extract the file PEAK-System_Driver-Setup.zip
3. Double-click the file PeakOemDrv.exe
The driver setup starts.
4. Confirm the start and the license agreements.
5. Follow the program's instructions. When selecting components, select the LIN
device driver (other components as needed).
The LIN monitoring software PLIN-View Pro is installed automatically.

2.2 Connection

Note: Do not use a USB extension cable to connect the LIN interface
to the computer. Extension cables do not comply with the USB
specification.
1. Connect the LIN interface to a USB port on the computer or to a USB hub.
Windows notifies you about the new hardware and completes the driver
installation.
2. Check the status LED. If the LED is green, the driver has been successfully
initialized.
2 Installation PLIN-USB
User Manual 2.1.0 © 2023 PEAK-System Technik GmbH
7