Installation; Installing The Software And The Pcan-Pc/104- Plus Card - Peak PCAN-PC/104-Plus User Manual

Pc/104-plus (pci) to can interface

Hide thumbs Also See for PCAN-PC/104-Plus:

Table of Contents

PCAN-PC/104-Plus – User Manual

Installation

This chapter deals with the software setup for the PCAN-PC/104-

Plus card under Windows, the installation of the card in the PC/104

stack, and the connection of a CAN bus.

Note: Under Windows the PCAN-PC/104-Plus card is run as a

PCI card.

3.1

Installing the Software and the PCAN-

PC/104-Plus Card

We recommend that you setup the driver before installing the

PCAN-PC/104-Plus card in the PC/104 stack.

Do the following to setup the driver and, if applicable, additional

software:

Make sure that you are logged in as user with administrator

privileges (not needed for normal use of the PCAN-PC/104-

Plus card later on).

Insert the supplied CD into the appropriate drive of the

computer. Usually a navigation program appears a few

moments later. If not, start the file Intro.exe from the root

directory of the CD.

On the page English > Drivers activate the entry PCAN-

PC/104-Plus.

Click on Install now. The setup program for the driver is

executed.

Follow the instructions of the program.

Table of Contents