Usb Strain-Relief - Siemens SIMOTION P320-3 Manual

Connecting

6.6 USB strain-relief

6.6 USB strain-relief
The USB strain-relief provided as an accessory is used to prevent accidental loosening of
the USB cable from the device. A cable binder (not included in the package) is needed to
use this accessory.
Required tools
To fix the USB strain relief, you will need a TORX T20 screwdriver.
Procedure
To attach the USB strain relief, proceed as follows:
1. Fasten the USB strain-relief
2. Thread the cable tie
98
thread).
②
cable.
Figure 6-4 USB strain-relief
①
to the device housing with an oval-head screw (M4
through the comb of the USB strain-relief to fasten the USB
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012