Table of Contents
Advertisement
Installing/Mounting
5.1
Installing SIMOTION P320-3
5.1.1
Mounting information
Requirement
Before you install the device, read the following mounting instructions.
NOTICE
Adhere to the relevant DIN/VDE requirements or the country-specific regulations when
installing in control cabinets.
NOTICE
Ensure that the device is classified as "Open Type" when using it in the area of Industrial
Control Equipment (UL508). A UL508 conform enclosure is therefore a mandatory
requirement for approval or operation according to UL508.
Types of installation
The following SIMOTION P320-3 installation types are permitted and described in the
following sections:
● Mounting onto standard rail (Page 76)
● Mounting with mounting brackets (Page 77)
● Book mounting (Page 79)
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
5
75
Advertisement
Table of Contents
