Table of Contents
Advertisement
2.3.3
HMI or ES via Ethernet (external access)
Complex networking with several HMI/ESs is only possible via Ethernet communication. This
allows both an external HMI/ES to access several SIMOTION devices and a SIMOTION
device to access another one (to display production data, for example).
Figure 2-5
Using Ethernet, several services are possible on a SIMOTION device:
● HMI software
● SIMOTION SCOUT engineering software
● SIMOTION IT
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
Model: Networking via Ethernet
WinCC flexible or OPC server can use Ethernet to access one or more SIMOTION
devices.
SIMOTION SCOUT can also use Ethernet to access one or more SIMOTION devices.
The SIMOTION devices support communication with standard IT protocols (HTTP) via
the integrated Ethernet interface. This makes it possible to use the intranet/Internet from
any location to access data or diagnostic information in the SIMOTION devices.
Note
Further information is contained in the SIMOTION IT Ethernet-based HMI and Diagnostic
Function Diagnostics Manual.
Description
2.3 HMI and SIMOTION SCOUT
27
Advertisement
Table of Contents
