Table of Contents
Advertisement
Installing/Mounting
5.4 Distributed configuration
5.4.2
Components for decentralized structure
The distributed configuration comprises several subcomponents based on the modular
principal; it is suitable for all SIMOTION panel fronts:
● SIMOTION P320-3 (DVI interface and USB 2.0 port)
● Panel PC Remote Kit for mounting on a TFT operator panel front
● Cable set for connecting the computing unit and the Panel PC Remote Kit (5 m to 30 m)
● USB transmitter module for cable lengths > 5 m
● Installation-specific mounting kits, such as
5.4.3
Mounting the Panel PC Remote Kit on a SIMOTION panel front
Procedure
To mount the Panel PC Remote Kit on a SIMOTION panel front, proceed as follows:
1. Attach the fastening hooks on the remote module to the panel front on the same side as
86
– Flat mounting brackets for fastening the SIMOTION P320-3 in the control cabinet
– Book mounting brackets for fastening the SIMOTION P320-3 in the control cabinet
the connecting cables.
Figure 5-3
Hooking the remote module into the SIMOTION panel front
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
Advertisement
Table of Contents
