Table of Contents
Advertisement
Spare parts/Accessories
11.1
Power supply
11.1.1
Over of power supply
An external power supply is needed to connect the SIMOTION P320-3 to the network.
The power supply must provide the following values for the SIMOTION P320-3:
Output voltage:
Output power:
Max. start-up current (for 30 ms):
Power failure buffering:
Dynamic upper voltage limit:
Dynamic lower voltage limit:
Voltage ripple:
Note
The relevant order numbers and more detailed information about the listed accessories can
be obtained from the online catalog in the Siemens A&D Mall
(http://www.siemens.com/automation/mall).
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
20.4 ... 28.8 VDC, typically 24 V
Typically 40 W (SIMOTION P320-3 alone), max.
130 W
4.5 A
At least 3 ms with 10 s recovery time
30.2 V
18.5 V
5%
11
127
Advertisement
Table of Contents
