Valve Lift Indicator; Valve Spring Compressor - Toro Hydroject 3010 Service Manual

Valve Lift Indicator - TOR4007 (Fig. 7)
A special dial indicator and adaptor is temporarily in-
stalled into the inspection port on the side of the high
pressure manifold to measure water valve lift. This
indicator is also used to measures cam wear and deter-
mines correct shim size to get proper valve lift.
Valve Spring Compressor - TOR4008 (Fig. 8)
The valve spring compressor and hardware is used for
compressing the water valve spring allowing removal
and installation of the valve spring retainer. The spring
retainer must be remove before servicing the water
valve, water valve seals, and water valve seat.
Special Tools Page 6 - 6
Figure 7
Figure 8
HydroJect 3010