Toro Hydroject 3010 Service Manual page 114

Adjustments
Brake Adjustment (Fig. 1)
1. Park machine on a level surface and stop the engine.
2. Remove screws securing cover to under side of tiller
handle. Remove cover.
1
3. Loosen upper jam nut securing brake cable to
bracket.
4. Tighten lower jam nut until 25 to 30 pounds of force
are required to actuate brake lever. Tighten jam nut.
5. Install lower cover.
Figure 1
1. Brake cable
Adjustments Page 7 - 2 Hydroject 3010