Table of Contents
Advertisement
STEP 1:
1. Cross Sensor wire (89) through Console fix tube (100), connect with the outgoing line of Console
(88).
2. Attach the Console (88) to the Console fixed plate (18) with Philips C.K.S. full thread bolts (24).
3. Attach Console fix tube (100) to the Console connecting frame (2) with 2 PCS Allen pan head full
thread bolt (34).
**NOTE: (34) is fixed on the Console connecting frame (2) and is not in the Bolt Pack.
STEP 2:
9
42
12
1. Install two Tube plugs (9) on the aluminium
Sliding rail fixed group (12) and lock tight
with two Philips C.K.S. self-tapping screw
9
(42).
42
7
Advertisement
Table of Contents
