Cortex SM-10 Owner's Manual page 10

STEP 4
1. Install the left and right handle (#13), (#14) into the upper connection (#12), fasten it with bolt
(#28) and flat gasket (#37).
2. Install the upper connection (#12) into the left and right columns (#10) (#11) and fix it with a flat
connecting plate (#22), bolt (#30), flat gasket (#37) and nut (#39).
3. Install the left and right parallel bars handle (#15) (#16) into the left and right columns (#10)
(#11) respectively.
4. Install the installed barbell sleeve on the rear support (#9) and fasten it with bolt (#28) flat gasket
(#37).
10