Download Print this page
BodyCraft POWER ROW MB1631 Owner's Manual

BodyCraft POWER ROW MB1631 Owner's Manual

Advertisement

Quick Links

Serial Number Location
MB1631
Model No. PRow
BODYCRAFT
is a division of Recreation Supply
POWER ROW
OWNER'S MANUAL
S E R I A L
1 2 3 4 5 6 7 8
Record your Serial number
and purchase date here:
S/N __________________
PURCH.DATE:_________
DEALER:______________
______________________
______________________
Recreation Supply Inc.
7699 Green Meadows Drive
Lewis Center, OH 43035

Advertisement

loading
Need help?

Need help?

Do you have a question about the POWER ROW MB1631 and is the answer not in the manual?

Questions and answers

Summary of Contents for BodyCraft POWER ROW MB1631

  • Page 1 PURCH.DATE:_________ DEALER:______________ ______________________ S E R I A L ______________________ 1 2 3 4 5 6 7 8 MB1631 Recreation Supply Inc. 7699 Green Meadows Drive Model No. PRow BODYCRAFT Lewis Center, OH 43035 is a division of Recreation Supply...
  • Page 2 6. Keep your hands away from moving parts other than the designated handles. 7. Exercise with care to avoid injury. 8. If you are unsure about the proper use of the BODYCRAFT POWER ROW call your local BODYCRAFT dealer or our customer service department.
  • Page 3 Product Placement Planner WALL 19.9 HEIGHT 69.6 12.6" Important Notes and Tips: Recommended Tools for Assembly 1. Do not tighten any bolts until instructed. 2. Two people are recommended for the safe assembly of this product. 3. Carefully install plastic caps using a rubber mallet. Ratchet or Adjustable 4.
  • Page 4: Parts List

    Parts List 1 NOTE: IF A PART IS MISSING, IT LIKELY HAS BEEN PRE-INSTALLED FOR QUALITY CONTROL PURPOSES. PLEASE PROCEED WITH ASSEMBLY. *Parts images are not to scale. (1) FRONT STABILIZER (2) REAR STABILIZER (4) FOOT PLATE (6) BUMPER x 2pcs (7) SEAT PAD (3) MONORAIL &...
  • Page 5 STEP 1 Assemble Monorail Assembly TO EASE THE ASSEMBLY PROCESS. DO NOT TIGHTEN BOLTS UNTIL INSTRUCTED. 1. Attach Bumper (6) to the Monorail Assembly (3) using two M6 X 10mm Set Screws (19). 2. Attach Front Stabilizer (1) and the Foot Plate (4) to the Monorail Assembly (3) using two M8 X 95mm Inner Hex Screws (15), two M8 Washers (23), and two M8 Nylon Nuts (24), as shown.
  • Page 6 Assembly is complete! Please take the following steps before using the BODYCRAFT POWER ROW : Make certain all bolts are tightened securely. Enjoy many years of a Fit Lifestyle. Thank you for purchasing the Bodycraft POWER ROW. If You have any questions, please call your local BodyCraft dealer.
  • Page 7 OVERVIEW...
  • Page 8 COMPLETE PARTS CHART NO. DESCRIPTION QTY. FRONT STABILIZER REAR STABILIZER MONORAIL ASSEMBLY FOOT PLATE SEAT PAD SUPPORT PLATE BUMPER SEAT PAD AXLE OVAL END CAP END CAP RUBBER BRACKET WHEEL BUSHING SPACER M8 X 95mm INNER HEX SCREW M8 X 40mm HEX THREADED BOLT M8 X 50mm INNER HEX SCREW...