Advertisement
A Few Words About Product Safety:
Your Quadratec
Skid Plate is intended
®
to enhance the performance and protec-
tion of your off road capable vehicle.
Before installation, please review the
following safety information and
installation recommendations.
Before You Begin Installation:
Congratulations on your purchase of
Quadratec
Skid Plate for your Jeep
®
Wrangler. This custom fit skid plate has
been designed for protection, long life,
and great looks. When unpacking, check
to make sure all parts are included and
not damaged due to shipping.
Throughout these instructions impor-
tant safety information is generally
preceded by one of three signal words
indicating the relative risk of injury,
property damage or adverse conse-
quence. The signal words mean:
a hazardous situation which, if not avoided, could result in death or
serious injury. You CAN be KILLED or SERIOUSLY HURT if you don't
follow instructions.
a hazardous situation which, if not avoided, could result in minor or
moderate injury. You CAN be moderately HURT and also may suffer
property damage if you don't follow instructions.
Careful attention is required to this instruction or operation but does
generally not relate to personal injury. Damage to your Quadratec
product or other property may result if you don't follow instructions.
If any part is missing or broken, please
call Customer Service at 800-745-6037
®
as soon as possible. Thank you again
for your purchase and let's start the
installation process.
READ ALL SAFETY MESSAGES AND ALWAYS WEAR
SAFETY GLASSES WHEN WORKING WITH TOOLS.
THIS PRODUCT IS INSTALLED UNDERNEATH THE VEHICLE AND
REQUIRES ACCESS TO THE UNDERSIDE. WE RECOMMEND USING A
VEHICLE LIFT SUCH AS THOSE FOUND IN MOST REPAIR SHOPS TO
ACCESS THIS PART OF THE VEHICLE. ALWAYS USE CAUTION WHEN
WORKING UNDER YOUR VEHICLE.
WE ALSO RECOMMEND THAT YOU HAVE A HELPER NEARBY AS SOME
OF THE STEPS OUTLINED BELOW WILL BE MUCH EASIER WITH THE HELP
OF ANOTHER SET OF HANDS.
WHILE INSTALLING SKID PLATES, VISUALLY SCAN FOR ANY
INTERFERENCE WITH DRIVETRAIN COMPONENTS AND/OR EXHAUST
COMPONENTS AND THE SKID PLATE.
IF THERE IS ANY INTERFERENCE, ADJUST THE SKID PLATE
ACCORDINGLY TO MAKE SURE ALL COMPONENTS ARE NOT TOUCHING.
FAILURE TO DO THIS STEP MAY CAUSE DAMAGE TO THE VEHICLE.
The Trusted Source
2
®
®
Advertisement
