Aluminum front bumpers for ’07-’18 wrangler jk vehicles (12 pages)
Summary of Contents for Quadratec 92034.1020
Page 1
Quadratec Drip Rail Mount ® Crossbars for Wrangler Installation Manual: for ’07 - Current JKU (4Door) & JL Vehicles 92034.1020 PARTS LIST: Rack Uprights QTY 4 Crossbars QTY 2 Rack Pedestals QTY 4 Crossbar Retaining Straps QTY 4 Vinyl Coated Clamps...
Page 2
A Few Words About Product Safety: Throughout these instructions import- Your Quadratec Cross Bar Rack is ® ant safety information is generally intended to enhance the utility of your preceded by one of three signal words off road capable vehicle. Before installa-...
Page 3
Installation Instructions: FIG 1 FIG 2 Put on safety glasses. Locate the 4 rack Loosely attach the vinyl coated clamp uprights and the rubber chafe strip. Use to the upright with a carriage bolt, flat scissors to cut the chafe strip into pieces washer, lock washer and hand knob.
Page 4
Installation Instructions: FIG 5 FIG 6 Slide the cross bar through the upright Attach the optional tie down loop to the and retaining strap. Repeat on opposite crossbar with a hex bolt and nylock nut. end. (FIG5) (FIG6) FIG 7 FIG 8 Tighten in the desired position with (2) Place the rack on top of the vehicle and...
Page 5
Installation Results: ® The Trusted Source...
Page 6
Quadratec to only to Quadratec branded accessories first sold obtain a RGA number (610-701-3336). All labor, in the United States, Quadratec warrants to the removal, shipping and installation costs are initial retail purchaser only that your Quadratec customer’s responsibility.