Trim Installation External - Screen Innovations 5 Motorized Owner's Manual

TRIM INSTALLATION - EXTERNAL
Fascia Install & Fascia Lock
Hook the front trim into the case opposite the weight bar and then rotate down
1
to secure. Make sure the trim is hooked into the case along entire length before
proceeding.
Hook the fascia onto the front of the case as shown below.
2
18
TRIM INSTALLATION - EXTERNAL
Trim Install
EXTERNAL
Use the 9/64'' hex key to loosen the two screws securing the fascia lock. Then slide the
1
lock down to lock the fascia in place. Finally secure the fascia lock by hand tightening the 2
screws securing the fascia lock position. Do this on both ends of the case.
EXTERNAL
26
19