Pre-Wiring - Screen Innovations 5 Motorized Owner's Manual

PARTS IN THE BOX - EXTERNAL - 24v DC
* NOTE: Screws are provided to mount to wooden structural supports only. If other substrate is
present then installer must provide appropriate fasteners.
L Brackets * Wood
Screws
24V Power Supply
4
Screen
Front Closure
Fascia
(2 pair) Idler Retraction
Gloves Tool
RTS ONLY LV - RTS ONLY
Telis 1 Remote Weidmuller connector
PRE-WIRING - 110v - RTS
1. Make sure an appropriate junction box or power receptacle is located within 5ft of the
installation location.
2. Wire in the pigtail power cable at the junction box per electrical code standards.
Antenna is part of Pigtail Cable. At least 12'' outside of the case must be exposed.
Do not cut the cables shorter than 12".
Installer must follow all local electrical codes when connecting AC line voltage power.
Certified electrician is required to connect pigtail power.
5