Mounting Flush L Brackets; Hang Case And Raise Up Flush L - Brackets - Screen Innovations 5 Motorized Owner's Manual

INSTALLATION - FLUSH

Mounting Flush L Brackets

5a Mount the L brackets either to a vertical or horizontal structural support as shown. Make
sure brackets are all along the same level line and plumb.
Mounting screws have been provided for mounting to wood structural supports only. If
mounting to other substrate then installer must provide appropriate fasteners.
Each bracket must be able to hold 200lb load.
7" - 2"
(17.8 cm - 5 cm)
A
10
OR
200 lbs
(90kg)
Each
7" - 2"
(17.8 cm - 5 cm)
A
Z
7
1/4"
(18.4 cm)
TO
7
3/8"
(18.7 cm)
W
Ceiling
INSTALLATION - FLUSH
Hang Case on L-Brackets and Raise Up
FLUSH L
2+
Make sure the hooks on the L brackets are adjusted down. Then raise the case up and
6a
hook the case into all 4 hooks on every bracket.
Tighten the screws in the L brackets to raise up the case untill the end flanges touch the ceiling.
Installation requires two or more people. Bend knees when lifting.
FLUSH L
11