Trim Installation Flush - Screen Innovations 5 Motorized Owner's Manual

TRIM INSTALLATION - FLUSH
Flush Trim Install
Hook the larger front closure into the case opposite the weight bar and then rotate
1
down to secure. Make sure the trim is hooked into the case along entire length before
proceeding.
Hook the smaller back closure into the case on the side of the weight bar and then rotate
2
down to secure. Make sure the trim is hooked into the case along entire length before
proceeding.
16
TRIM INSTALLATION - FLUSH
Flush Trim Locking
FLUSH L FLUSH SUSPENDED
Insert the bumpers into the holes in the endplates. Press the pin in the bumper until you
3
feel a SNAP indicating the bumper is secured. Before proceeding make sure the bumpers
are secured to the endplates. Do this at both ends of the screen.
FLUSH L FLUSH SUSPENDED
SNAP
17