Types Of Cables; Expansion Cable Connection - Honeywell ML200 Series Installation And Commissioning Manual

The following image illustrates the expansion base of ML200R, which supports dual I/O link
redundancy.
Figure 5: Expansion base of ML200R (with dual I/O link redundancy)
The following table provides the expansion base details of ML200R, with dual I/O link redundancy.
Table 18: Expansion base details of ML200R
Index Part
1
2
3
4
5
1.5

Types of cables

Cables for ML200-IEC

Expansion cable connection

The expansion cables contain high frequency noise. Therefore, to meet the CE conformance standards,
attach a ferrite core to the expansion cable as illustrated in the following figure.
Base attached guide hole
Power module connector
Expansion redundancy drive
module connector
Module built-in connector
FG terminal
Chapter 1 - Masterlogic components
Function
For attaching the main base to the panel in the
control panel.
For installation of power supply module.
For installation of expansion redundancy driver
modules.
For installation of I/O, special and other
communication modules.
The ground terminal connected to the shielded
pattern of the PCB board.
- 14 -